logo
último caso de la compañía sobre

Detalles de las soluciones

Created with Pixso. En casa Created with Pixso. soluciones Created with Pixso.

Guangdong University Deploys Brushless Flap Barrier Turnstiles for High-Throughput Campus Access Control

Guangdong University Deploys Brushless Flap Barrier Turnstiles for High-Throughput Campus Access Control

2026-11-16

In a public university in Guangdong Province, China, the campus management team replaced the ageing entry gates at three high-traffic pedestrian points — the main library entrance, the teaching-building lobby and the dormitory zone — with a bank of brushless flap barrier turnstiles. The campus accommodates more than 20,000 students and staff, and the previous gates simply could not absorb the 7:40–8:20 morning peak. After a competitive tender, the university selected a brushless, economically priced flap barrier configuration that delivered measurable throughput gains without exceeding the capital budget.




Customer Background

  • Location: Guangdong Province, China (humid subtropical climate, high pedestrian volume)
  • Sector: Higher education — public university campus
  • Population served: 20,000+ students, faculty and campus staff
  • Access points upgraded: Library entrance, teaching-building lobby, dormitory zone
  • Access credential: Campus smart card / QR code / face recognition integration



Challenges the University Faced

  1. Queue build-up at peak hours. Legacy swing gates allowed roughly 15–18 persons per minute; queues backed up 40–60 metres into the campus plaza every morning.
  2. High maintenance cost. Brushed motors required frequent brush replacement in the humid Guangdong climate, generating recurring labour and downtime.
  3. Safety concerns. Students walking with umbrellas, laptops and backpacks frequently struck the moving wings; the old units had no effective rebound protection.
  4. Budget discipline. As a public institution, the university required an economical solution with a low total cost of ownership across a five-year service life.
  5. Tight installation window. The works had to be completed during the eight-week summer break.



Delivered Solution and Technical Specification

The selected model is a single-lane brushless flap barrier turnstile with transparent acrylic wings, supplied in the compact footprint shown below.

Parameter Specification Project Benefit
Dimensions L1500 × W280 × H990 mm Compact 280 mm cabinet width preserves corridor space while the 1500 mm length houses a full-length wing travel
Drive system Brushless DC motor No carbon brush wear, maintenance-free operation, lower noise and far longer service life
Control board Brushless motor controller board Accurate position feedback, smooth acceleration ramp, self-diagnostics on start-up
Barrier wings Transparent acrylic Full visibility for security staff, modern appearance, impact-resistant and easy to clean
Throughput 25–30 persons per minute Roughly 60% higher peak flow than the replaced gates
Collision protection Mechanical anti-collision + force-resistance anti-collision (dual protection) Wings absorb and rebound on impact; motor torque limits before injury or damage occurs
Positioning Economical high-volume configuration Best cost-per-lane ratio in the tender evaluation



Performance Data After Handover

Metric Before Upgrade After Upgrade
Verified throughput per lane 15–18 persons/min 25–30 persons/min
Morning-peak queue length 40–60 m Under 10 m
Motor brush maintenance Every 6 months None required (brushless)
Wing-impact incidents reported Recurring weekly Zero injury reports in first semester
Installation duration — Completed within the 8-week summer break



How the Dual Anti-Collision Design Works in Practice

Two independent layers protect students at the gate line:

  • Mechanical anti-collision. The acrylic wing is mounted on a sprung clutch. When a student brushes or strikes the wing, the wing physically gives way instead of stopping dead, then returns to its home position automatically. No motor stall, no broken wing.
  • Force-resistance anti-collision. The brushless controller continuously monitors motor current. If resistance exceeds the configured threshold — for example a person leaning on the wing — the drive instantly reverses and releases, limiting the applied force well below the level that could cause injury.

For a campus where students walk shoulder-to-shoulder with umbrellas, trolley bags and bicycles at the same time, this combination proved to be the decisive factor in the tender scoring.



Why the Brushless Configuration Was Chosen

Guangdong's humid, salt-laden air is notoriously hard on brushed motors: carbon brushes wear quickly and commutators corrode. By moving to a brushless motor and brushless control board, the university removed the single largest recurring maintenance item from its five-year budget. In parallel, the brushless drive runs quieter — an important point for the library entrance — and delivers more consistent torque across the full wing cycle, which is exactly what sustained 25–30 persons per minute demands.



Results and Client Feedback

Across the first full semester of operation, the three upgraded access points handled the morning peak without a single queue extending beyond the entrance plaza. Campus security reported zero wing-impact injuries, and the facilities team confirmed no motor maintenance was required. The university's project lead summarised the outcome simply: the gates are economical, durable and fast — precisely the three priorities set at the start of the tender.



Conclusion

This Guangdong university project demonstrates that a well-specified, economically positioned brushless flap barrier turnstile can deliver enterprise-grade reliability on a public-institution budget. Compact dimensions, transparent acrylic wings, verified throughput of 25–30 persons per minute and layered mechanical plus force-resistance anti-collision protection together form a repeatable blueprint for campus, factory and office-park access control projects worldwide.

último caso de la compañía sobre
Detalles de las soluciones
Created with Pixso. En casa Created with Pixso. soluciones Created with Pixso.

Guangdong University Deploys Brushless Flap Barrier Turnstiles for High-Throughput Campus Access Control

Guangdong University Deploys Brushless Flap Barrier Turnstiles for High-Throughput Campus Access Control

In a public university in Guangdong Province, China, the campus management team replaced the ageing entry gates at three high-traffic pedestrian points — the main library entrance, the teaching-building lobby and the dormitory zone — with a bank of brushless flap barrier turnstiles. The campus accommodates more than 20,000 students and staff, and the previous gates simply could not absorb the 7:40–8:20 morning peak. After a competitive tender, the university selected a brushless, economically priced flap barrier configuration that delivered measurable throughput gains without exceeding the capital budget.




Customer Background

  • Location: Guangdong Province, China (humid subtropical climate, high pedestrian volume)
  • Sector: Higher education — public university campus
  • Population served: 20,000+ students, faculty and campus staff
  • Access points upgraded: Library entrance, teaching-building lobby, dormitory zone
  • Access credential: Campus smart card / QR code / face recognition integration



Challenges the University Faced

  1. Queue build-up at peak hours. Legacy swing gates allowed roughly 15–18 persons per minute; queues backed up 40–60 metres into the campus plaza every morning.
  2. High maintenance cost. Brushed motors required frequent brush replacement in the humid Guangdong climate, generating recurring labour and downtime.
  3. Safety concerns. Students walking with umbrellas, laptops and backpacks frequently struck the moving wings; the old units had no effective rebound protection.
  4. Budget discipline. As a public institution, the university required an economical solution with a low total cost of ownership across a five-year service life.
  5. Tight installation window. The works had to be completed during the eight-week summer break.



Delivered Solution and Technical Specification

The selected model is a single-lane brushless flap barrier turnstile with transparent acrylic wings, supplied in the compact footprint shown below.

Parameter Specification Project Benefit
Dimensions L1500 × W280 × H990 mm Compact 280 mm cabinet width preserves corridor space while the 1500 mm length houses a full-length wing travel
Drive system Brushless DC motor No carbon brush wear, maintenance-free operation, lower noise and far longer service life
Control board Brushless motor controller board Accurate position feedback, smooth acceleration ramp, self-diagnostics on start-up
Barrier wings Transparent acrylic Full visibility for security staff, modern appearance, impact-resistant and easy to clean
Throughput 25–30 persons per minute Roughly 60% higher peak flow than the replaced gates
Collision protection Mechanical anti-collision + force-resistance anti-collision (dual protection) Wings absorb and rebound on impact; motor torque limits before injury or damage occurs
Positioning Economical high-volume configuration Best cost-per-lane ratio in the tender evaluation



Performance Data After Handover

Metric Before Upgrade After Upgrade
Verified throughput per lane 15–18 persons/min 25–30 persons/min
Morning-peak queue length 40–60 m Under 10 m
Motor brush maintenance Every 6 months None required (brushless)
Wing-impact incidents reported Recurring weekly Zero injury reports in first semester
Installation duration — Completed within the 8-week summer break



How the Dual Anti-Collision Design Works in Practice

Two independent layers protect students at the gate line:

  • Mechanical anti-collision. The acrylic wing is mounted on a sprung clutch. When a student brushes or strikes the wing, the wing physically gives way instead of stopping dead, then returns to its home position automatically. No motor stall, no broken wing.
  • Force-resistance anti-collision. The brushless controller continuously monitors motor current. If resistance exceeds the configured threshold — for example a person leaning on the wing — the drive instantly reverses and releases, limiting the applied force well below the level that could cause injury.

For a campus where students walk shoulder-to-shoulder with umbrellas, trolley bags and bicycles at the same time, this combination proved to be the decisive factor in the tender scoring.



Why the Brushless Configuration Was Chosen

Guangdong's humid, salt-laden air is notoriously hard on brushed motors: carbon brushes wear quickly and commutators corrode. By moving to a brushless motor and brushless control board, the university removed the single largest recurring maintenance item from its five-year budget. In parallel, the brushless drive runs quieter — an important point for the library entrance — and delivers more consistent torque across the full wing cycle, which is exactly what sustained 25–30 persons per minute demands.



Results and Client Feedback

Across the first full semester of operation, the three upgraded access points handled the morning peak without a single queue extending beyond the entrance plaza. Campus security reported zero wing-impact injuries, and the facilities team confirmed no motor maintenance was required. The university's project lead summarised the outcome simply: the gates are economical, durable and fast — precisely the three priorities set at the start of the tender.



Conclusion

This Guangdong university project demonstrates that a well-specified, economically positioned brushless flap barrier turnstile can deliver enterprise-grade reliability on a public-institution budget. Compact dimensions, transparent acrylic wings, verified throughput of 25–30 persons per minute and layered mechanical plus force-resistance anti-collision protection together form a repeatable blueprint for campus, factory and office-park access control projects worldwide.